4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance For Drill Motor 14.8V 16.8V Lipo Cell Module
261
پارەدانێکی سەلامەت

گەڕانەوەی کاڵاکان تا 40 ڕۆژ لە دوای وەرگرتنی کاڵاکە قبوڵ دەکرێت. کاڵای تایبەتکراو ناتوانرێت گەڕێندرێتەوە یان گۆڕدرێت. کاڵای کڕدراو بە کارتی دیاری تەنها گۆڕدرێت؛ پارەگەڕانەوە نییە.
دیاریی بێبەرامبەر
بەخێربێن بۆ Roymall، ماڵپەڕی پیشەگەری کڕینی دیاریی پلەی یەک. ئێمە بەرزترین بایەخ دەدەین بە پشتگیری ئێوە و دەمانەوێت سوپاسگوزاری خۆمان بۆ دەربڕین بە زیادکردنی دیارییەکی تایبەت بۆ کڕینەکانتان. کاتێک لەگەڵ ئێمە کڕین دەکەن، تەنها بەرهەمی بەرچاو وەرناگرن کە ژیانتان باشتر دەکات، بەڵکو دیارییەکی تایبەتی بێبەرامبەریش وەردەگرن لەگەڵ هەر داواکارییەک. ئامادەیت بۆ گەڕان لە کۆکراوەکەمان و دیاریی تایبەتت بدۆزیتەوە؟ سەردانی کۆکراوەکەمان بکە بۆ دیاریی پلەی یەک، داواکارییەکەت پێشکەش بکە و چاوەڕێی دیاریی بێبەرامبەرەکە بکە کە لەگەڵ کڕینەکەت دێت.سیاسەتی گواستنەوە
ئێمە کار دەکەین بۆ گواستنەوەی کاڵاکان بۆتان دوای وەرگرتنی داواکارییەکان و دڵنیابین لەوەی کە بە سەلامەتی دەگەن. وردەکاریی گواستنەوە لە ئیمەیڵی ڕەزامەندیدا دەدرێت.لە زۆربەی حاڵەتەکان، داواکارییەکان لە ماوەی 2 ڕۆژدا پێشکەش دەکرێن. لە حاڵەتی تایبەتدا، دواکەوتن ڕوودەدات وەک لەمەیە: کاتێک داواکاری لە شەممە، یەکشەممە یان پشووی فەرمی دەکەن، دواکەوتن بۆ 2 ڕۆژ دەبێت.بەشێوەیەکی ئاسایی، پێویستی بە 5-7 ڕۆژی کارکردن (دووشەممە بۆ هەینی) هەیە بەبێ ئەوەی کاریگەری لەسەر بێت لەلایەن دواکەوتنی فڕۆکە یان هۆکارەکانی ژینگەیی.لەبەر ئەوەی خزمەتگوزاری گواستنەوەکەمان جیهانییە، کاتەکانی گواستنەوە بەستراون بە شوێنەکەتەوە و لەوانەیە چەند کاتێکی تر ویست بێت و تکایە چاوەڕێ بکە ئەگەر لە ناوچەی دوور یان وڵاتێکی تر بیت.1. سیاسەتی گەڕانەوە و گۆڕین
ئێمە تەنها کاڵای کڕدراو لە roymall.com قبوڵ دەکەین. ئەگەر لە دابەشکەرە ناوخۆییەکانمان یان فرۆشیارەکانی تر کڕیت، ناتوانیت لە لای ئێمە بیگەڕێنیتەوە. کاڵای فرۆشراو یان دیاریی بێبەرامبەر ناتوانرێت گەڕێندرێتەوە. بۆ وەرگرتنی مافی گەڕانەوە، کاڵاکەت پێویستە بەکارنەهێنرابێت و لە هەمان دۆخدا بێت کە وەریگرتوە. هەروەها پێویستە لە پاکەتی ڕەسەنیدا بێت.دوای وەرگرتنی ڕێنماییی گەڕانەوە لە لای ئێمە، تکایە کاڵاکەت بپارچێوە و پاکەتەکەت لە پۆستە ناوخۆییەکەت یان کۆریەرێکی تر بەجێبهێڵە.ئێمە داواکاریی گەڕانەوە یان گۆڕینەکەت لە ماوەی 3-5 ڕۆژی کارکردن دوای وەرگرتنی پێشکەش دەکەین. پارەگەڕانەوە بۆ هەمان شێوازی پارەدان ڕێکخست دەکرێت.هیچ گەڕانەوە یان گۆڕینێک قبوڵ ناکرێت ئەگەر بەرهەمەکە بە شێوەی تایبەت دروستکرابێت، لەوانەش قەبارەی تایبەت، ڕەنگی تایبەت، یان چاپی تایبەت.پێویستت بە یارمەتی زیاترە؟ تکایە پەیوەندیمان پێوە بکە. service@roymall.com یان Whatsapp: +86193598494712. سیاسەتی پارەگەڕانەوە
تۆ پارەیەکی تەواو یان 100% کریڵتی کڕینی وەردەگریت دوای ئەوەی پاکەتی گەڕاوە وەرگریمان و پشکنینمان بۆ کرد. پارەگەڕانەوە بۆ هەمان شێوازی پارەدان ڕێکخست دەکرێت. تکایە بیرت بێت کە تێچووی گواستنەوە و هەر باج یان کرێیەک ناتوانرێت گەڕێندرێتەوە. تێچووی زیاتری گواستنەوە ناتوانرێت گەڕێندرێتەوە دوای ئەوەی پاکەتەکە نێردراوە. تۆ بەرپرسیاریت لە پارەدان بۆ ئەو کرێیانە و ئێمە ناتوانین بیانبەخشین یان بیگەڕێنینەوە، تەنانەت ئەگەر داواکارییەکە گەڕێندرێتەوە بۆ لای ئێمە.دوای ئەوەی کاڵای گەڕاوەمان وەرگرت و دڵنیابوومان لێی، ئیمەیڵێکت بۆ دەنێرین بۆ ئاگادارکردنەوە لەوەی کە کاڵای گەڕاوەمان وەرگرتووە. هەروەها ئاگادارت دەکەینەوە لەوەی کە داواکاریی پارەگەڕانەوەکەت پەسەندکراوە یان ڕەتکراوەتەوە.ئەگەر کێشەیەکت هەیە لە پرۆسەی پارەگەڕانەوە، تکایە پەیوەندیمان پێوە بکە. service@roymall.com یان Whatsapp: +8619359849471
Feature:
4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 45 * 55 * 3.4mm (Standard Edition / Enhanced), 46 * 60 * 3.4mm (balanced version)
Product weight: 9.3g (standard / enhanced version), 10.3g (balanced version)
Charging voltage: 16.8V - 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
Equalization version: suitable for starting current below 80A, power 135W below the drill.
Project | Min. | Typ. | Max. | Units |
Consuming current | 12 | 18 | 24 | uA |
Overcharged protection voltage | 4.2 | 4.25 | 4.3 | V |
Balanced starting voltage | 4.17 | 4.2 | 4.23 | V |
Equilibrium current | 95 | 100 | 105 | mA |
Balanced heating power | 1.56 | 1.72 | 1.91 | W |
Overcharge recovery voltage | 4.1 | 4.15 | 4.2 | V |
Over-discharge protection voltage | 2.4 | 2.5 | 2.6 | V |
Overvoltage protection after over-discharge protection | 2.8 | 3 | 3.2 | V |
Overvoltage protection after over-discharge protection | 3.2 | 3.5 | 3.8 | V |
Over-discharge recovery voltage | 2.9 | 3.2 | 3.3 | V |
Conduction internal resistance | 2.5 | 3 | 3.5 | mu03a9 |
Overcurrent protection current C | 70 | 80 | 90 | A |
Overcurrent delay time | 100 | 150 | 200 | ms |
Continuous operating current | 0 | 40 | 40 | A |
Continuous output power | 0 | 672 | 672 | W |
Ambient temperature | -40 | 25 | 85 | u00b0C |
Troubleshooting: | ||
Fault phenomenon | Fault check and cause | The solution |
Unable to charge | Measuring the voltage of 4 groups of batteries. when one of the battery voltages exceeds 4.25V, the protection board will activate overcharge protection. | Pair the battery pack well, do not mix the good battery and the bad battery. |
Unable to discharge | Measuring the voltage of 4 groups of batteries. when one of the battery voltages is lower than 2.7V, the protection board will activate the over-discharge protection. | Pair the battery pack well, do not mix the good battery and the bad battery. |
Charging/discharging failure | 0V, 4.2V, 8.4V, 12.6V, 16.8V miswired | Rewire or replace the new board (human failure, no warranty) |
Overcharge/over-discharge failure | 0V, 4.2V, 8.4V, 12.6V, 16.8V miswired | Rewire or replace the new board (human failure, no warranty) |
Discharge protection | Check that the battery pack has sufficient discharge capability and check that the load"s starting current exceeds the over-current protection current of the protection board. | Replace the battery pack with a higher discharge capacity, or a protective plate with a larger current (super working range) |
Component soldering | There is no connection between one of the components and the PCB pad. | Repair welding |
Component welding | There is a short circuit between two or more pins of the component. | Remove the component and re-weld |
Electrostatic breakdown A | In the unpowered state, measure the G, D, and S poles of the MOSFET. If the forward and reverse resistances of any two pins are 0u03a9, it indicates that it has broken down. | Remove the replacement MOS tube |
Electrostatic breakdown B | Remove the MOS tube and measure the resistance of the G and D, G and S poles of the MOS tube. If there is a resistance indicating that it has broken down, the resistance should be infinite. | Remove the replacement MOS tube |
Package includes:
1 x Battery Protection Board
1 x Battery Protection Board